Works with
DashCAN for Haltech
Live gauges, CAN logging and CAN switches on your phone, and with the Apex a GPS lap timer with the Haltech channels on the same timeline. The app decodes the Haltech broadcast out of the box; you enable it once in your tuning software.
- CAN bit rate
- 1 Mbit/s
- Channels decoded
- 16
- Interface
- Apex only
Channels the app decodes from a Haltech
These show up as gauges, get logged, and land in DashCAN Cloud. Channels your engine does not measure or your ECU does not transmit simply stay empty.
- RPM
- MAP
- TPS
- Fuel Press.
- Oil Press.
- Inj. Duty
- Advance
- Lambda
- VSS
- Gear
- Vbat
- Boost Target
- EGT
- ECT
- IAT
- Oil Temp.
Which interface you need
The Haltech broadcasts at 1 Mbit/s. The OBD and Wire-In interfaces run at a fixed 500 kbit/s, so this ECU needs the DashCAN Apex.
- DashCAN Apex
- The Haltech broadcasts at 1 Mbit/s, and the Apex is the only DashCAN interface with an adjustable CAN bit rate. It also adds the 25 Hz GPS lap timer and the 6-axis IMU.
Setup
The First Steps guide has the Haltech CAN connection, the exact settings in the tuning software, and the app pairing, step by step.
Add lap timing and G-forces
With the DashCAN Apex the Haltech channels are recorded together with a 25 Hz GPS trace and a 6-axis IMU: automatic lap timing, acceleration runs, G-G diagrams and corner analysis in DashCAN Cloud, all on the same timeline as the engine data.
Put your Haltech data on your phone.