4 wires need to be connected to set up the device. These are the switched 12V (+), GND (Ground, -), CAN High (CANH) and CAN Low (CANL). The CAN High and CAN Low wires should be connected to legs 60 (CANH) and 58 (CANL) of the ECU.

Important! The CANH and CANL wires should be run as a twisted pair to ensure signal integrity and the total wire length should not exceed 1.5 meters.

For further help on wiring, please visit the Technical Help page.

Download the 2 files from the "Downloads" section below and open the "Ignitron ECU" Windows program. Connect your laptop to the ECU.

Make sure your ECU has the V1.25 Firmware or newer!

Open the "CAN communication" menu on the left, then tick the "Send custom CAN messages" and "Receive custom CAN messages" options. Two new menu items should appear in the left menu column with the same names.

Open the menu item "Send custom CAN messages" and click on the "Import" button. Find the appropriate file and import it. Repeat this in the "Receive custom CAN messages" menu.

Download the "DashCAN - Ignitron ECU" app to your iOS or Android phone/tablet. You can do this by simply scanning the QR code below, or click the following links.

After installing the app, launch it and then approve all the permission requests and turn on Bluetooth, otherwise the app will not work properly!

If everything is done correctly the app will automatically connect to the DashCAN interface. You're now ready to monitor your vehicle's data in real-time!